Diesel Particulate Filter Cleaner with Hose

Description

Diesel Particulate Filter Cleaner with Hose. Condition is "New". Shipped with USPS Parcel Select Ground.
Cleaning agent for the removal of carbon and ash deposits from diesel particulate filters located within exhaust system.
Loosens and removes carbon deposits in particulate filters.
Removal of the DPF (Diesel Particulate Filter) not necessary for cleaning.
Saves money, as a new particulate filter may not need to be installed (this depends on the condition of the particulate filter).
Non-flammable
Neutral ash and metal-free formula
Evaporates without leaving residue behind.
Area of Use:
Used to remedy reductions in performance and malfunctions caused by soiled diesel particulate filters. Cleaning restores the full flow capacity of the filter. The EGR valve can also be cleaned with the product.
Application:
Remove the temperature or pressure sensor. Insert the tube through the opening which has been made and empty in the direction of the particulate filter via spraying. Regeneration must then be initiated manually by the tester or by taking a test drive. After regeneration, query the error memory and clear any errors which may be present. One can is sufficient for a particulate filter on a standard vehicle. Two cans are recommended for large truck filters.
This advice is based on our own research and experience. It is presented in good faith and may be considered reliable. However, due to the diverse processing, application and handling possibilities the information provided may not be considered legally binding. The same applies to the information provided by our technical and commercial customer service.
We recommend the users of our products to perform their own tests in order to determine whether our products are appropriate for the respective use and environment. We guarantee the consistent quality of our products. We reserve the right to implement technical changes and improvements.
Technical Data:
Color: Pink
Scent: Aminic
Density at 20°C: 1.010 g/cm3
pH value: 11.47
Note:
Do not apply to a hot exhaust system. Maximum temperature for application is 122°F (50°C).
Extra Spay Hose: 0891564